User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP E1347A:Temperature Multiplexer
DATE:                  11-Dec-96
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       13
NUMBER OF LINES:       124
STANDARD:              Fluke 702
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
# 1.003  DISP         ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
# 1.003  DISP         º Required Equipment º
# 1.003  DISP         ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
# 1.003  DISP         Thermo Electric MicroMite II Calibrator
# 1.004  OPBR         Is the MM II DTB number 25-30?
# 1.005  JMPF         1.008
# 1.006  STD          Thermo Electric MM II (1)
# 1.007  JMP          1.009
# 1.008  STD          Thermo Electric MM II (2)
  1.003  STD          Fluke 702
  1.004  HEAD         ÍÍINITIAL CONDITIONS ÍÍ
  1.005  DISP         Remove the HP E1347A 16 CH THERMOCOUPLE MUX card
  1.005  DISP         from the UUT.  Connect a "T" type connector with
  1.005  DISP         "T" type T/C wire to mux channel 0.  Connect a "K"
  1.005  DISP         type connector with "K" type T/C wire to mux channel 8.
  1.005  DISP         Connect the "T" type connector to the 702.
  1.006  HEAD         {}
  1.007  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.008  HEAD         {º ThermoCouple Tests º}
  1.009  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.010  HEAD         {ÍÍ "T" Type T/C ÍÍ}
  1.011  JMP          2.001
  1.012  EVAL
  2.001  DISP         Set the 702 for a "T" type T/C.
  2.001  DISP         Set the output for -206øC.
  2.002  IEEE         [@109:3]*RST
  2.002  IEEE         [@109:3]MEAS:TEMP? TC,T,(@201)[I]
  2.003  IEEE         [@109:3][D1000]MEAS:TEMP? TC,T,(@201)[I]
  2.004  ACC          -206.00øC      0.3U
  2.005  MEME
  2.006  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.3, TUR 6.667 (>= 4.00).
  3.001  DISP         Set the 702 output for 0øC.
  3.002  IEEE         [@109:3]MEAS:TEMP? TC,T,(@201)[I]
  3.003  IEEE         [@109:3][D1000]MEAS:TEMP? TC,T,(@201)[I]
  3.004  ACC          0.00øC         0.3U
  3.005  MEME
  3.006  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.3, TUR 6.667 (>= 4.00).
  4.001  DISP         Set the 702 output for 400øC.
  4.002  IEEE         [@109:3]MEAS:TEMP? TC,T,(@201)[I]
  4.003  IEEE         [@109:3][D1000]MEAS:TEMP? TC,T,(@201)[I]
  4.004  ACC          400.00øC       0.3U
  4.005  MEME
  4.006  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.3, TUR 6.667 (>= 4.00).
  5.001  HEAD         {}
  5.002  HEAD         {ÍÍ "K" Type T/C ÍÍ}
  5.003  JMP          6.001
  5.004  EVAL
  6.001  DISP         Connect the "K" type connector to the 702.
  6.002  DISP         Set the 702 for a "K" type T/C.
  6.002  DISP         Set the output for -200øC.
  6.003  IEEE         [@109:3]*RST
  6.003  IEEE         [@109:3]MEAS:TEMP? TC,K,(@208)[I]
  6.003  IEEE         [@109:3][D1000]MEAS:TEMP? TC,K,(@208)[I]
  6.004  ACC          -200.00øC      0.3U
  6.005  MEME
  6.006  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.3, TUR 6.667 (>= 4.00).
  7.001  DISP         Set the 702 output for 0øC.
  7.002  IEEE         [@109:3]MEAS:TEMP? TC,K,(@208)[I]
  7.003  IEEE         [@109:3][D1000]MEAS:TEMP? TC,K,(@208)[I]
  7.004  ACC          0.00øC         0.3U
  7.005  MEME
  7.006  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.3, TUR 6.667 (>= 4.00).
  8.001  DISP         Set the 702 output for 1370øC.
  8.002  IEEE         [@109:3]MEAS:TEMP? TC,K,(@208)[I]
  8.003  IEEE         [@109:3][D1000]MEAS:TEMP? TC,K,(@208)[I]
  8.004  ACC          1370.00øC      0.3U
  8.005  MEME
  8.006  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.3, TUR 6.667 (>= 4.00).
  9.001  JMP          13.001
  9.002  HEAD         {}
  9.003  HEAD         {ÍÍ "J" Type T/C ÍÍ}
  9.004  JMP          10.001
  9.005  EVAL
 10.001  DISP         Set the 702 for a "J" type T/C.
 10.001  DISP         Set the output for -180øC.
 10.002  IEEE         [@109:3]*RST
 10.002  IEEE         [@109:3]MEAS:TEMP? TC,J,(@200)[I]
 10.003  ACC          -180.00øC      0.2U
 10.004  MEME
 10.005  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.2, TUR 10.000 (>= 4.00).
 11.001  DISP         Set the 702 output for 0øC.
 11.002  IEEE         [@109:3]MEAS:TEMP? TC,J,(@200)[I]
 11.003  ACC          0.00øC         0.2U
 11.004  MEME
 11.005  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.2, TUR 10.000 (>= 4.00).
 12.001  DISP         Set the 702 output for 750øC.
 12.002  IEEE         [@109:3]MEAS:TEMP? TC,J,(@200)[I]
 12.003  ACC          750.00øC       0.2U
 12.004  MEME
 12.005  MEMC         øC             2U
#!          Test Tol 2, Sys Tol 0.2, TUR 10.000 (>= 4.00).
 13.001  DISP         Disconnect the thermocouple wires from the mux card.
 13.002  HEAD         {}
 13.003  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 13.003  DISP         {º THIS COMPLETES THE VERIFICATION º}
 13.003  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 13.004  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.